Self-evalution detector HD 01.01/C

suitable for securing workplaces
with occurrence of hazardous substances

but also boiler rooms, workshops, garages or homes.

Home use

The self-evalution gas detector HD 01.01/C is the simplest version of the industrial detector of explosive and burnt or annoying or poisonous gases long-established in practice. According to the built-in sensor, it allows one-stage to two or two-stage evaluation of one type of gas.
On hd 01.01 models with single-level evaluation allow measurement of a evaluation of explosive methane and annoying carbon dioxide. Thus equipped is especially suitable for monitoring the heating system of the family house for the security of a suitable environment for people in the home.
All these models are equipped with an external power socket and a 12V adpter.

HD 01.01 simultaneous detection CO a CH₄

HD 01.01/1 simultaneous detection CO a CH₄ with relay output

HD 01.01/C CH₄ - natural gas or propane-butane

HD 01.01/C-2 CH₄ - natural gas or propane-butane with relay output

HD 01.01/C-A detection CO

HD 01.01/C-2A detection CO with relay output

Industrial use

Other types of detector with two-level evaluation meet the standards for use in smaller production and industrial production with the occurrence of hazardous substances at ensuring a suitable working environment.
I. level Warning a
II. level Alarm
signalization is triggered by triggering a warning audible signal and activating the relay, which can be used to switching the next warning device, but also to switching other respective devices.
Relay outputs are without voltage contact. External audible as well as light-signalling devices can be connected to the device as needed

All of these two-level models are equipped with relay output:
HD 01.01/C-3	CH₄ - natural gas or propane-butane
HD 01.01/C-4	CH₄ - natural gas or propane-butane	+12V adpter
HD 01.01/C-5	meranie CO	+12V adpter
HD 01.01/C-6	meranie CO
HD 01.01/CR	It is possible to connect to UD 11.01 processor units

Users manual:

HD01_01.pdf

Users manual:

HD01_01.doc

Supply voltage:	10-16V= (16-24V=)
Environment:	Non-explosion
Ingress Protection	IP 40
Loading capacity of relays:	230V; 5A
Preset values:	On request, we can set different
CH₄ (methane)	0,5 % - 1,0 %
CO (carbon monoxide)	60ppm- 120ppm

HD 01.01	simultaneous detection CO a CH₄
HD 01.01/1	simultaneous detection CO a CH₄	with relay output
HD 01.01/C	CH₄ - natural gas or propane-butane
HD 01.01/C-2	CH₄ - natural gas or propane-butane	with relay output
HD 01.01/C-A	detection CO
HD 01.01/C-2A	detection CO	with relay output

MIKro-trade s.r.o.

Self-evalution detector HD 01.01/C

suitable for securing workplaces with occurrence of hazardous substances

but also boiler rooms, workshops, garages or homes.

suitable for securing workplaces
with occurrence of hazardous substances